How to use fully automatic washing machine for dehydration
The dehydration function of a fully automatic washing machine is an indispensable part of the modern household laundry process, but many users still have questions about how to use the dehydration function correctly. This article will introduce in detail the use, precautions and answers to frequently asked questions about dehydration in a fully automatic washing machine to help you make better use of this function.
1. Basic steps for dehydration in a fully automatic washing machine
1.put in clothes: Put the clothes that need to be dehydrated evenly into the inner drum of the washing machine to avoid accumulation on one side, otherwise it may cause unbalanced dehydration.
2.Select a dehydration program: Select the appropriate dehydration speed according to the material and quantity of clothes. Usually, fully automatic washing machines provide a variety of dehydration speed options, such as 800 rpm, 1000 rpm, etc.
3.Start dehydration: Press the start button and the washing machine will automatically complete the dehydration process. The dehydration time is generally 3-5 minutes, depending on the model and settings of the washing machine.
2. Precautions for dehydration function
1.Even distribution of clothing: Uneven distribution of laundry during dehydration may cause the washing machine to vibrate or stop running. It is recommended to manually adjust the position of the clothes before spinning.
2.avoid overloading: The dehydration capacity of the washing machine is usually smaller than the washing capacity. Overloading will affect the dehydration effect and even damage the washing machine.
3.Special laundry treatments: For delicate clothing such as wool and silk, it is recommended to choose low-speed dehydration or manual wringing to avoid damaging the clothing fibers.
3. Frequently Asked Questions
| question | Solution |
|---|---|
| Washing machine vibrates too much during dehydration | Check whether the laundry is evenly distributed, adjust the position of the laundry or reduce the amount of laundry. |
| Clothes are still wet after dehydration | Check whether the spin speed setting is too low or whether the washing machine drainage system is clogged. |
| Dehydration program cannot be started | Make sure the washing machine door is closed tightly or the correct program is selected. |
4. Dehydration speed selection guide
| Clothing type | Recommended speed (rev/min) |
|---|---|
| cotton clothing | 1000-1200 |
| Chemical fiber clothing | 800-1000 |
| wool/silk | 400-600 |
5. Maintenance suggestions for dehydration function
1.Regular cleaning: Clothing fibers may remain during the dehydration process. It is recommended to clean the washing machine's inner barrel and drainage system once a month.
2.Avoid long periods of non-use: If the dehydration function is not used for a long time, it may cause parts to age. It is recommended to run the dehydration program every once in a while.
3.Check the drain pipe: Make sure the drainage pipe is clear to avoid poor drainage affecting the dehydration effect.
6. Energy-saving tips for dehydration function
1.Reasonable choice of speed: Not all clothes need to be dehydrated at the highest speed. Appropriately lowering the speed can save energy.
2.Batch dehydration: Try to dehydrate more clothes at one time and avoid starting the washing machine frequently.
3.Use waste heat: The dehydrated clothes can be dried immediately and the residual heat of the washing machine can be used to speed up drying.
Through the above introduction, I believe you have a more comprehensive understanding of the dehydration function of a fully automatic washing machine. Correct use of the dehydration function can not only improve washing efficiency, but also extend the service life of the washing machine. If you have other questions, you can refer to the washing machine's instruction manual or contact after-sales service.
check the details
check the details
en
